Skip to content

Tudor Row Houses – Part 4

Part 4 brings us the roof sections.  Using my standard method, I began by creating a cardboard base, then I cut a ton of shingle strips and began affixing them to the roof base.  I deviated a bit from my usual method, by leaving the shingles the same length and not cutting to different lengths.  My reasoning here is that I am going for a more well taken care of building and want the roof to look more put together.  I did try and keep things looking a little rough and uneven, as I am trying to simulate hand made shingles.  I also left out a few shingles as I do want it to look a little worn.

IMG_5829

Shingles in place

Gluing the shingles took time, but I eventually finished and was able to move on to the eaves.  For the fascia, I took balsa strips and cut them down to make an edge, then glued them to the roof.  Inside that, I laid down a thinner layer of balsa sheet to make the soffits.  I etched in lines to make it look like the soffits were made of individual boards rather than single sheets.

IMG_5833

Soffits and Fascia

For the Chimneys I used my new hot wire jigsaw and cut long strips of foam.  I took two of them and cut them in two pieces.  then I cut thin strips of foam and glued those strips in between the two newly cut sections before reattaching the section back together.  My attempt here is to create a fancier looking chimney that looks like it has some nice brick detail on it. I also glued some cut off drinking straws and glued them to the top to add another level of detail.

Once the chimneys were assembled, I carved in the same stone pattern I used in the base.  Following that I then used the same paint scheme and again filled in the space between the stones with spackle. TO finish them off, I gave them a series of green, brown and black washes to simulate smoke residue ad other weathering.

IMG_5842

Finished chimneys

WP_20131106_003

Chimneys and roofs before final painting and assembley

Once the chimneys and the roofs were complete, I cut holes in the roofs to fit the chimneys and primed the roofs black. Then it was time to put the final coats of paint on everything.  Lighter and lighter drybrushed coats of grey on the shingles, and lightening shades of brown on the eaves to match the wood on the timbers of the building.

IMG_5834

Finished roofs

IMG_5835

Closer look at rooflines and chimney

Finished soffits and fascia

Finished soffits and fascia

Over the rooftops

Over the rooftops

 

Next up: (Hopefully) the home stretch! Final assembly of all the pieces, and some detail work.  Also, if I can manage it, some sort of frame for the base as well as the pouring of the canal.

ShareFacebooktwittergoogle_plusredditpinterestlinkedinmail

2 thoughts on “Tudor Row Houses – Part 4

  1. RUMTIGER says:

    THANKS FOR SHARING YOUR BEAUTIFUL WORK WITH US. I Really appreciate it. I’m a beginner and am currently working on my first Tudor-Like Building (-Prototype). For our upcoming COnfrontation-Dogs of War Campaign.
    Right now i have to get some Paint on the Daub and tudor-wood and i could not satisfy myself with all color combinations I’ve tried so far. I’ll try to use your work as an inspiration. So again; thank you 🙂

    Reply
    • Zaboobadidoo says:

      You are welcome. Glad to hear that I could help. Also really glad (and amazed) to see that someone else is playing Confrontation/Dogs of War. I’ve been out of the loop in both those games lately, but I did just play a quick pick-up game with a buddy of mine. How often do you play?

      Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

AlphaOmega Captcha Classica  –  Enter Security Code